Our Achievements

In partnership with Dietlin, FiveCo has developed adaptable, secure and user-friendly watch displays that combine robust mechanics with intelligent electronics.

FiveCo is collaborating with Jules Gonin Hospital to finalize Panoret II, an ultra-wide-angle fundus camera. After designing the prototype and software, the project is now entering the validation phase.

This showcase is a combination of skills from our engineering department, mixing mechanics, ultra-low power electronics, optics and embedded programming.

Secure necklace support, without protective glass between jewel and customer.

Developed in collaboration with the Fondation Asile des Aveugles de Lausanne, this ocular imaging device prototype will facilitate the detection of ocular tumors within the framework of a clinical study in preparation. 

The totem pole of values of the Ecole Hôtelière de Lausanne - Large version.

FiveCo has developed a trajectory controller for a tiny watch stepper motor.
 

FiveCo, in collaboration with Fischer Connectors’ innovation lab, has developed a high-speed optoelectronic connection with one rotational degree of freedom.

Evolution of the THEye module for secure temperature and humidity measurement via Bluetooth

Watch display without bell, working as a secure door through the use of an iPad.

Bluetooth module allows the temperature and humidity to be measured securely.

FiveCo and Pilot Design have developed a very special object. A sculpture? A clock? Both.

Clock with a developed watch movement allowing the speed and position control of each of the three hands, this in a totally independent way.

This illuminated flag offers excellent visibility at night at several hundred meters.

Hinge allowing an original movement and opening of the case.

FiveCo has developed an interface for smartphones (Android, iOS) to control its motors controllers via WiFi communication.

Concept presenting a watch in an aerial and secure way, while allowing you to see the back of its case.

Dynamic installation for 2 watches combining a modular sequencer and a contemporary design. 

This machine adapts to different types of chains and offers perfectly regular and precise sharpening while maintaining sharpening angles.

The totem pole of values of the Ecole Hôtelière de Lausanne.

This display unveils 4 watches with elegance and technology.

With this new interactive system, the customer enjoys complete independence when purchasing his watch. The display, in the image of Tag Heuer, marks its avant-garde spirit.

This display presents products in a fun and safe way, in interaction with a touch-screen.

Display with IR sensors that activate the closing of a diaphragm in case of intrusion.

This mediaplayer allows to connect screens via LVDS or HDMI and to execute videos stored on an uSD or USB memory. 

Display without glass, with motion detection and protection of the watch in case of intrusion.

Rotating display allowing a presentation of 2 watches. The secured showcase without glass allows a real proximity of the watch.

Synchronization of elements for a bundle animation.

This Carrousel showcase was enriched with a second tray and can support a weight over 50kg.

An unparalleled marriage of cutting-edge technology, mechanics and 100% Swiss know-how.
 

The X-Smart iQ system developed in collaboration and exclusively for Dentsply Maillefer is a cordless endodontic motor actioned by an Apple iOS(R) application.

Ten years after the development of the Raptor display, we have reworked it whilst maintaining a system retractable in one tenth of a second if there is an intruder.

Bidirectional communication and power transfer system by induction.

Battery management system that monitors the load of each cell independently. 

This motorized system is designed to display a watch dynamically, thanks to its compact mechanics.

This advanced sequencer can synchronize various elements to bring to life the showcase.

The electronic controls allow you to synchronize the 3 motors of the screens with videos custom-made for this system.

The Raptor allows you to retract the watch back into a secure zone in less than half a second.

Flexible film that allows you to modify transparency at will.

Enables the optimization and control of the energy consumption of a building.

Executive desk combining high technology and craftsmanship, with secret drawers.

Magnifying glass discreetly integrated into a showcase

The electronic labels have a permanent display and operate without a battery.

This showcase gives the illusion that a watch is floating in the center thanks to the invisible mechanics.

System that allows you to control high-power motors from the DMX control board.

This device enables the display of a video onto the surface of a sphere, both inside and outside. 

Display of letters and shapes in a special liquid solution called Ferrofluid.

Synchronization of films and animations onto several OLED screens.

In continuity with the project Mémoire du Vin, FiveCo has developed a showcase for vintage wines. It combines oak, glass and leather to highlight the nobility of a wine of excellence.

This nightstand has the particularity of incorporating in one of its legs a secret drawer in the form of a capsule divided into three illumninated compartments.

This standalone OLED display enables the creation of animations from any video, image or text.

This system allows for the display a watch under every angle thanks to a compact mechanical system.

This display allows the user to try on watches without touching them by placing their wrist through a glass bell and viewing up to four watches.

This software superimposes a DXF file onto the live image of a workpiece.

The object is hidden under a spyglass and becomes visible through LED lighting.

FiveCo has developed an innovative wine cellar management system based on RFID technology.

This device allows to amplify the natural sound of the watch by capturing the sound vibrations transmitted through the crown. The sound is then transmitted via a wooden resonance surround.

This watch case, once deployed, allows the user to view all the details of a watch.

This watch case in Makassar ebony integrates a touch button that allows to activate an LCD glass with an opacity driver and a white LED lighting system with UV. This system highlights the watch.

Reduced size control device (83 x 50 x 12.5 mm) for 5 brushed DC motors with 32bit PID algorithms for position or speed control.

This watch display is a rotating plate with four niches, each showing a different setting.

Retractable post with an electrical motor and extremely compact electronic control system.

The user can move around a watch and view the tiniest details via their web navigator. 

FiveCo has developed the electronics for a controller allowing to program various animations onto liquid crystal glass composed of 45 different areas.

This mobile robot is remotely operated with a joystick through a WiFi wireless communication link.

This case, equipped with a camera with LED lighting, provides a precise movement over a tray with three watches, in order to admire their details on a flat screen.

This device allows for the control of DC motors from the control board of the light/sound box.

The Barrel can display up to four watches thanks to a turnstile system, at the same time preserving the Raptor‘s ingenious anti-theft feature.

This secure system for displays allows the removal of the glass casing. If a visitor comes too close to the displayed item, the latter vanishes inside the display case in less than 100 milliseconds.

For controlling the length of your presentations, meetings, discussions, etc... 

This system allows the showcase to become interactive with the visitor as never before, bringing to the fore the value of the displayed pieces.

Wireless high-fidelity transmission system for industry.

FiveCo is a leader in Licence Plate Recognition Software for road radars.

FiveCo developed the electronics, software and image processing system for the VideoCAM product for the company Marcel Aubert.

Considering the growth in Bluetooth devices, FiveCo created a development kit for companies wishing to connect their devices rapidly through a Bluetooth radio communication protocol.

ATA hard drive interface example with an 8bit microcontroller.

This fully autonomous domotic item is controlled via Bluetooth protocol thanks to a simple PDA or a computer.

This project consisted in developping a low consuption mobile robot for ASTRIUM Space.