FMod-I2CSTEPMOT SLP 35/x
New product !
Very small control device for 2 phases stepper motors (max 35W continuous) with ¼ step motion control for position or speed control using the trapezoidal trajectory profile. Ultra low power consumption in standby mode, typically less than 50na for each supply at 25°C, therefore ideal for portable and compact applications.
All the calculations are done on board, in order to minimize the communication rate with a control/supervising I2C master. Up to 112 devices can be connected to the same I2C bus in daisychain configuration.
This daughter board can easily be soldered directly to a motherboard without any cables through its 20 + 2 plated holes on board edge (1.27mm spacing). In addition to that, 1.27 mm spacing male connector can be soldered to the board, making it plugable, horizontally or vertically, to a dedicated motherboard.
Two different versions of this board are available, depending on the motor power needs :
- FMod-I2CSTEPMOT SLP 35/0.1: 35V max, up to 150 mA
- FMod-I2CSTEPMOT SLP 35/1: 35V max, from 100mA to 1A